Sikafloor Duraseal 20L

Description

Duraseal is a Clear Single Pack, Penetrating Concrete Sealer

Sikafloor Duraseal is a one component penetrating, non-yellowing protective sealer for concrete floors.

Typical areas of use are

• Warehouses and storage facilities.
• Car parks and garages.
• Light industrial buildings.
• Exterior pavements.

CHARACTERISTICS AND ADVANTAGES

•  Easy to apply with brush, roller and air or airless spray.
• Good resistance to oils, grease and tyremarks.
• Suitable for exterior exposure.
• Good resistance to abrasion.
• Available in clear or grey colour.
• Non-yellowing.

Duraseal’s Coverage/ Usage is

5-10 m2 per Litre approx. for open or textured surfaces.       10-15m2 per Litre for sealed or more closed surfaces.

Coats – 2 to 3 normally and depending on concrete’s porosity, more coats might be required to achieve a glossy finish,  to achieve higher gloss finish, consider using Sikafloor PU.

For larger quantity orders send us a message on our request a quote page and we will get back to you with a competitive pricing

20L drum

Quick Guide  |  PDS  |  SDS

https://aus.sika.com/dms/getdocument.get/f9b9225a-16d3-4e96-b00b-bcd166199d0e/sikafloor_duraseal.pdf

Colour accuracy disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.

Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.