Epimax 999WB – Two pack, water based, clear epoxy sealer

Two Part Economic Epoxy Concrete Sealer

 

Clear concrete Sealer applied over concrete as protective layer

$100.00$1,480.00 inc GST

Quantity:

Description

Description

Epimax 999WB, Two pack epoxy sealer

EpiMax 999WB Concrete Protective Sealer is a hazmat free, two component water based clear epoxy coating system specially formulated to provide ease of application, fast hardening and excellent adhesion to concrete. This system provides economical and functional concrete slab protection in parking facilities, warehouses, factories, plant rooms, offices and restaurants.

EpiMax 999WB is also used as a general purpose clear protection system for polished concrete floors. Concrete professionally protected with EpiMax 999WB demonstrate good materials handling equipment and automotive fluid stain resistance. Importantly, these slabs will not dust since the slab surface is tightly bound and secure.

These protected floors are non-porous, monolithic, chemically inert and hygienic. They are far easier to clean and maintain. They also present brighter, lighter facilities with lower illumination costs, since wet, unprotected concrete reduces available illumination. EpiMax 999WB complies with sustainable construction standards.

 

Advantages of Epimax999WB

  • Available in satin or matt
  • Hazmat free/non flammable
  • Water based – odourless & food safe
  • Environmentally friendly
  • Fast installation – roller or spray
  • Self priming
  • Good adhesion to concrete or masonry surfaces
  • Minimal tyre squeal
  • Good resistance to marking
  • Meets GBCA Low VOC standard
  • Meets BCA CRF Fire standard
  • Anti-dusting formulation
  • Good durability – maintenance free
  • Meets AS 4586 Slip Resistance standard
  • Fully cross-linking system – high surface integrity

 

Typical applications of Epimax999WB

  • Parking facilities
  • Retail service areas
  • Garden
  • Shopping malls
  • Restaurants
  • Correctional facilities
  • Warehouses
  • Self-storage units
  • Plant rooms
  • Factories

 

Standard version properties of Epimax999WB

  • Satin: 1 part activator : 2 parts base
  • Matt: 1 part activator : 1 part base
  • Shelf life: 18 months
  • Tack free time: 60 – 90 minutes at 25ºC (depends on air flow)
  • Work time: 2 hours at 25ºC
  • Recoating window: 6 – 12 hours at 25ºC (depends on air flow)
  • Rain fast: 24 hours at 25ºC
  • Light traffic: 12 – 24 hours at 25ºC (depends on air flow)
  • Full cure time: 5 days at 25ºC
  • Abrasion resistance: 95 mg/1000 cycles CS-17 wheels, 1 kg load
  • Wet pendulum slip rating (AS 4586-2013): P3 (with Additive 50)
  • Reaction to fire, CRF: 12.1 kW/m2
  • Volume solids content: 45%

 

Coverage information
Depending on surface porosity more product/coats might be required to seal the surface
20 ltr EpiMax 999WB Concrete Protective Sealer = 120 m2 (2 coats)
60 ltr EpiMax 999WB Concrete Protective Sealer = 360 m2 (2 coats)

 

Epimax 999WB Epoxy Product and Safety Data Sheets

 

 

Epimax 999WB – EpiMax’s Website

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Epimax 999WB – Two pack, water based, clear epoxy sealer”

Your email address will not be published. Required fields are marked *

Disclaimer

Colour accuracy disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.

Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.