Sikafloor 21 PurCem – 20kg kit

Description

Sikafloor®-21 PurCem® is a multi-component, water-based coloured polyurethane hybrid screed with self-smoothing properties. It has a smooth, matt, impervious, hard wearing surface and is typically installed at 3–6 mm thickness.

USES

Sikafloor®-21 PurCem® is used as a scratch coat primer, basecoat and wear coat layer in Sikafloor®PurCem® system build ups, in areas of medium to heavy loading, high chemical exposure and abrasion.

CHARACTERISTICS AND ADVANTAGES

• Good chemical resistance
• High mechanical resistance
• High glass transition point
• Non tainting /odourless
• VOC free
• Can be applied to substrates with high moisture content (7 days old or mature damp concrete – or 10% pbw)

COLOUR
Part A = coloured liquid after tinting
Part A (neutral) = light beige liquid
Part B = brown liquid
Part C = natural grey powder
Pigment = colourpack – various colours
Standard RAL colours: Dusty Grey – Traffic Grey – Curtain Call – Beige – Grass Green – Maize Yellow- Oxide Red – Sky Blue

PACKAGING

Sikafloor PurCem 21: 80kg Mix: (A+B+C+Pigment) Made To Order: Non Stock item

Sikafloor Purcem Colour Card

Sikafloor Purcem Flooring Data Sheets

Sikafloor Purcem 21 – Sika’s Website

Colour accuracy disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.

Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.