Alkaseal Clear Concrete Acrylic Sealer – 20 litre

Description

Alka Seal – Solvent Based Concrete Acrylic Sealer

Protect your concrete surfaces with AlkaSeal, a solvent-based acrylic sealer designed for warehouses, garages, industrial floors, and exterior pavements. It provides non-yellowing, long-lasting protection with good resistance to oils and greases

Where It Can Be Used:

•  Warehouses & storage facilities
• Car parks & garages
• Light industrial building
•  Exterior pavements

Advantages:

• Easy to apply
• Non-yellowing formula
• Good resistance to oils & greases
• Suitable for exterior exposure
• Available in clear

Surface Preparation:

The substrate must be sound, free from dust, surface water and surface contaminants such as oil, grease, fats, chemicals, rust, paints curing membranes, etc. All loose materials and surface laitance must be removed. For larger areas shot blasting, high-pressure water blasting or scabbling is recommended. On small areas needle gunning or bush hammering can be effective. The tensile strength of the substrate should be at least 1.5 MPa. Pre-wetting the substrate is not necessary except on very absorbent substrates and/or when exposure to intense sunlight is probable. There should be no visible or standing water. May be applied to green and moist cementitious substrates.

Important Considerations

• Thinning of AlkaSeal is not recommended.
• Provide adequate ventilation.
• AlkaSeal is a combustible liquid.

Application Instructions

AlkaSeal can be applied by spray or roller. Application of the first and possibly the second coat should be carried out on falling temperature to avoid the possibility of bubbling from air escape from the substrate and to maximise penetration. Premature exposure to moisture from the substrate or atmosphere may result in whitening/clouding of the finished product. A trial area is recommended before proceeding. Apply evenly and avoid leaving any excess product on the surface. As AlkaSeal is a thin coating, all imperfections will be reflected through the coating.

You can contact Sydney Industrial Coatings for expert advice and tailored flooring solutions.

Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator.

Learn more about Epoxy Warehouse

Colour accuracy disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.

Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.