Sikadur 506 Sand 20KG

Description

Sikadur®-506 has been specifically developed for compatible use with a range of Sika products to provide a selection of non-skid surfaces that will help
promote safety in the work place. Sikadur®-506 MESH AU is scattered liberally over Sikafloor®-264 (base coat) at a uniform rate to achieve a coarsely textured non-slip surface once the sealer coat has been applied. Sika’s Aggregates can also used as the Component C Aggregate for Sikafloor®-91 and Sikafloor 160.

CHARACTERISTICS / ADVANTAGES

• Compatible with Sikagard® and Sikafloor® flooring and coating systems
• Provides a coarse textured, slip-resistant floor finish

Grinding Mesh: 16 – 140 (0.1 – 1.2mm)

Bulk Density: 1.75kg/L

Sikadur 506 Safety Data Sheet

Colour accuracy disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.

Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.