SikaBond 58 Wood Floor – 600ml (Box of 20)

APPLICATION INSTRUCTIONS
For the application of SikaBond®-58 Wood Floor all standard construction guidelines apply.
For further information, please refer to the Method Statement “Full Surface Bonding”.

SUBSTRATE PREPARATION

• The substrate must be clean, dry, sound and homogeneous, free from oils, grease, dust and loose or friable particles. Paint, cement laitance and other poorly adhering contaminants must be removed.
• Concrete and/or cement screeds must be ground and thoroughly cleaned with an industrial vacuum.
• Anhydrite screeds, including flowable anhydrite screeds must be ground and thoroughly cleaned with an industrial vacuum shortly before bonding with the adhesive starts.
• Broadcast mastic asphalt must be primed with Sika^® Primer MR Fast or Sika^® Primer MB. For the instructions for use, please refer to the corresponding Product Data Sheet.
• Glazed ceramic and old existing ceramic tiles must be degreased and cleaned with Sika^® Aktivator-205, or the tile surfaces must be ground and then thoroughly cleaned with an industrial vacuum.
• Wood and/or gypsum boards (e.g. chipboard, plywood) must be glued and/or screwed to the substructure in order to be fixed to the substrate. For floating dry-floors, contact our Technical Service Department.
• For other substrates contact our Technical Service Department for advice and assistance.
• For broadcasted mastic asphalt, cement based floors with excessive moisture content and use over old adhesive residues or on weak substrates use Sika^® Primer MB. For detailed instructions contact our Technical Service Department.

SikaBond 58 Wood Floor Data Sheets