SikaBond 58 Wood Floor 600ml Ssg Ochre (20 per box)
SikaBond®-58 Wood Floor is a 1-component, solvent-free, wood flooring adhesive with good workability.
Uses & Advantages
SikaBond®-58 Wood Floor is designed for full surface bonding of solid and engineered wood floors and ply boards.
CHARACTERISTICS AND ADVANTAGES
Adhesive can be sanded
Floors can be sanded after 12 hours
Elastic, footfall-sound dampening properties
Suitable for use with underfloor heating
Very low emissions
Reduces stress transfer between the wood floor and the substrate
Good bead stability
Good workability and plasticity
Low VOC content
600 ml foil pack
16 kg metal pail
For the application of SikaBond®-58 Wood Floor all standard construction guidelines apply.
For further information, please refer to the Method Statement “Full Surface Bonding”.
The substrate must be clean, dry, sound and homogeneous, free from oils, grease, dust and loose or friable particles. Paint, cement laitance and other poorly adhering contaminants must be removed.
Concrete and/or cement screeds must be ground and thoroughly cleaned with an industrial vacuum.
Anhydrite screeds, including flowable anhydrite screeds must be ground and thoroughly cleaned with an industrial vacuum shortly before bonding with the adhesive starts.
Broadcast mastic asphalt must be primed with Sika® Primer MR Fast or Sika® Primer MB. For the instructions for use, please refer to the corresponding Product Data Sheet.
Glazed ceramic and old existing ceramic tiles must be degreased and cleaned with Sika® Aktivator-205, or the tile surfaces must be ground and then thoroughly cleaned with an industrial vacuum.
Wood and/or gypsum boards (e.g. chipboard, plywood) must be glued and/or screwed to the substructure in order to be fixed to the substrate. For floating dry-floors, contact our Technical Service Department.
For other substrates contact our Technical Service Department for advice and assistance.
For broadcasted mastic asphalt, cement based floors with excessive moisture content and use over old adhesive residues or on weak substrates use Sika® Primer MB. For detailed instructions contact our Technical Service Department.
Colour accuracy disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.
Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.