Eco Screed – 20kg

Blended cement based screed under tiles

$15.50 inc GST

SKU: 8A985C Categories: , , ,



Sika® Eco Systems Eco Screed is a preblended cement based economical screed consisting of selected graded aggregates, Portland cement and selected additives.



Sika® Eco Systems Eco Screed can be used as a bonded screed from 15mm – 100mm in a single application. Sika® Eco Systems Eco Screed can be used unbonded from 30mm – 100mm unbonded in a single application. Sika® Eco Systems Eco Screed can be used internally & externally.



  • Pre-blended ready to mix with water
  • Convieniant to move around construction sites
  • Controlled consistent performance and mix.
  • Installation of tiles may commence after 24 hours.


Grey Powder


20kg Bags



Mixing ratio
1.8 – 2.1 Litres of clean water per 20kg bag.

Layer thickness
Bonded: Minimum 15mm – 100mm thickness
Unbonded: 40mm – 100mm thickness

Pot Life
Approximately 2 hours at 23°C & 50% RH


Sika Eco Screed Data Sheets



Sika® Eco Systems Eco Screed – Sika’s Website

Reviews (0)


There are no reviews yet.

Be the first to review “Eco Screed – 20kg”

Your email address will not be published. Required fields are marked *



Colour accuracy disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.

Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.