Sikafloor Level Eco – 20 KG

High Build Level and Smoothing Compound

 

$35.00 inc GST

Quantity:

Description

Description

Sikafloor Level Eco is designed for high build applications & often being installed by pumping equipment on commercial & domestic projects.

 

USE

  • Applied in combination with suitable materials from Sikafloor®, SikaBond®, Sikadur®, SikaTite® & Davco® ranges.
  • Specially designed for pumping
  • Recommended underlayment for all commercial & residential floor coverings
  • Levelling of uneven concrete up to 75mm
  • Suitable for new or old internal concrete substrates

 

CHARACTERISTICS AND ADVANTAGES

  • Very Low VOC (~1 gram per litre)
  • Non-combustible
  • Green Star Certified
  • High strength
  • Economical levelling solution
  • Simply mix & apply – No slaking or re-mixing required
  • Good pot life and working time – slow setting
  • Pump or manual application

 

Packaging

20kg Bag

Pallet = 48 bags

 

Sikafloor Level Eco Datasheets

Sikafloor Level Eco – Sika’s Website

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Sikafloor Level Eco – 20 KG”

Your email address will not be published. Required fields are marked *

Disclaimer

Colour accuracy disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.

Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.