Nutech SupaPrime Primer 15L

Description

SupaPrime is a deep penetrating nanotechnology modified, water based acrylic Roofing primer. The nanoparticle technology of this primer has been developed to penetrate and strengthen the bond of aged, powdery and oxidised pre-painted roof tiles. With its exceptional wetting and penetrating properties, SupaPrime effectively strengthens and stabilizes the inter-coat bond of these hard surfaces, preparing them to apply Nutech Paint’s range of roof coating systems.

SupaPrime’s key advantage lies in its nano-technology-modified polymer composition. This advanced technology enables the primer to interact effectively with the surface at a molecular level, ensuring maximum adhesion and durability.

Benefits:

• Fast-drying speed
• Easy application
• Promotes inter-coat adhesion with Nutech Paint topcoats
• 100% water and weatherproof
• High resistance to mould and fungus

Application Conditions:

• ONLY apply between 10°C and 30°C ambient air temperatures
• ENSURE no surface moisture is present prior to application
• CONSIDERATION must be given to wind and relative humidity
• DO NOT apply topcoat until the primer is completely dry
• DO NOT apply SupaPrime in very cold or extremely hot conditions
• Failure to observe these provisions may affect coating adhesion

Appearance:

Milky white viscous liquid

Coverage:

4 m²/L (One coat)

Note: Coverage will depend on the porosity and roughness of the surface. To maximise performance do not over spread.

Coats Required: 1 Coat

Recommended Substrates:

• Powdery oxidised concrete roof tiles
• Porous concrete and cinder block walls
• Lightweight concrete panels
• Tilt slab concrete walls
• Concrete render stucco and stucco-type wall finishes

Additional Notes:

Do not spray on extremely hot surfaces. Heavy application is not required to maximise penetration through the powdery surface

Download Datasheets.

Colour accuracy disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.

Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.