Lanko 751 Lankolatex SBR

Description

Davco Lanko 751 Lankolatex is a flexible SBR additive designed for use with Lanko, Davco and general mortar systems. Davco Lanko 751 Lankolatex provides improved adhesive and compressive strength, water resistance and flexibility. It can also improve workability to make mortars easier to mix and place.

USES

Davco Lanko 751 Lankolatex may be used as an additive with Lanko cement based technical mortars, in particular mortars for screeding, rendering, patching and repair. Davco Lanko 751 Lankolatex can be used in conjunction with neat cement as a bonding coat prior to the application of any mortar system. Davco Lanko 751 Lankolatex can also be used as an additive for any of Davco’s range of cement based tile adhesives and grouts.

CHARACTERISTICS AND ADVANTAGES

• Water-resistant
• Improved adhesive and compressive strength
• Flexible
• Ideal for screeding, rendering, patching and repairing with Davco Lanko cement based technical mortars

COLOUR
White

MIXING
Mix Lanko 751 Latex with the correct amount of water to produce a gauging solution. Pour part of the gauging solution into a suitable mixing container. While stirring slowly, add the cement/sand mix to the gauging solution and mix thoroughly until a smooth, uniform and lump-free mix is achieved. Within the mixing time add additional gauging solution to adjust to the desired consistency.

Mixing Ratio
1) For Bonding Bridge;
Lanko 751 Latex : Water : Cement = 1 kg : 1 ltr : 4 kg or ~ 1 : 1 : 3 (by volume)
2) For Mortar
Liquid part; Lanko 751 Latex : Water = 1:1 to 1:3 (by volume)
Dry mix part; Cement : Sand = 1:1 to 1:3 (by volume)

Lanko 751 Lankolatex SBR Sika Data Sheets

 

Sika® Lanko 751 Lankolatex SBR – Sika’s Website

Colour accuracy disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.

Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.