Nutech Tileflex Roof Coating – 12 Year Warranty – 15L

high performance, nanotechnology modified acrylic polymer roof coating. high gloss finish, comes in 29 standard colours. Refer to the colour chart .

$205.00$390.00 inc GST

Quantity:

Description

Description

Nutech Tileflex is a high performance, nanotechnology modified acrylic roof coating developed specifically to provide excellent resistance to UV exposure. The nanotechnology modification to the acrylic polymer lowers the coatingโ€™s surface friction to significantly reduce dirt pick up and retention. TileFlex will stay cleaner, retain colour and gloss longer than any conventional acrylic roof coating on the market.

Nutech TileFlex contains UV-resistant, non-fading pigments and tough, flexible 100% acrylic polymers, transforming any roof into an attractive and functional surface. In addition, TileFlex is guaranteed not to peel, fade or crack, subject to correct surface preparation and application. TileFlex is available in a high gloss finish. In addition, it comes in 29 standard colours and can be custom colour-matched upon request.

Features

  • 12 Year Manufacturerโ€™s Warranty*
  • 100% Acrylic membrane coating
  • Contains nanotechnology to repel dirt and retain gloss
  • Superior longer-lasting gloss finish
  • Contains polymer preservatives for algae and fungus protection
  • Weatherproof
  • Ultraviolet resistant pigments
  • Excellent UV resistance
  • Low VOC

Appearance

Opaque white or coloured viscous liquid

Coverage / Spread Rate

4mยฒ/L.ย Minimum System Dry Film Thicknessย 200ยตm.ย To maximise performance, do not over spread.

Application Conditions

  • Only apply between 10ยฐC and 30ยฐC ambient air temperatures
  • Ensure no surface moisture is present prior to application
  • Consider other climatic conditions such as wind, humidity, dew, or expected rain within 24 hours
  • Do not apply TileFlex until the primer is completely dry
  • Coating in very hot or cold conditions may reduce gloss appearance and affect durability

Failure to observe these provisions may affect coating adhesion and performance.

Note:

Do not apply TileFlex in very low or very high temperatures.

Recommended Substrates

Suitably prepared and primed surfaces, including concrete & terracotta roof tiles, sheet metal, asbestos, cement sheet and asphalt shingles & sheets.

Refer to the Technical Addendum in this TDS or contact us for the most suitable primer product for your project.

Nutech Roof Membrane Coating Care & Maintenance Fact Sheet

Download Datasheets.

Download Colour Chart

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Nutech Tileflex Roof Coating – 12 Year Warranty – 15L”

Your email address will not be published. Required fields are marked *

Disclaimer

Colour accuracy disclaimer:ย We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.

Product Disclaimer:ย Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturerโ€™s recommended method.

You may also like…