Ultrakote Premium Grade High Solids Epoxy.

ULTRAKOTE Premium Grade Coloured High Solids Epoxy Resin


UltraKote HS Epoxy is a premium grade, coloured, high solids, low yellowing, self priming epoxy floor coating resin designed to protect concrete floors and offer seamless durable floor protection.

Advantage of UltraKote High Solids Epoxy Resin to Compare to similar products

  • The biggest advantages of Ultrakote HS Epoxy resin over other similar high solids products are that it has an extended pot life, which means the applicator has enough time to apply the mixed product without stressing & It has Excellent resistance against UV light, which means it will not change colour in front of rollers doors.
    Not suitable for exterior surfaces as a top coat. for an external coating system consider using UltraKote UvSeal
  • Excellent hot tyre pick-up resistance, which makes it a great choice for garage epoxy floors
  • Excellent wear and abrasion resistance.
  • Excellent fuel and chemical resistance.
  • Produces smooth and glossy finish, slip resistance floor finishes can be achieved by adding anti-slip media to the coating system.
  • Easy application by brush, roller, squeegee or spray equipment.
  • Available in a wide range of colours to achieve an attractive & aesthetically pleasing finish.

Areas of use

  • Garage floors as a single colour application & base coat for flake flooring systems
  • Warehouses
  • Aircraft hangers
  • Schools
  • Mechanical workshops
  • Commercial kitchens


UltraKote High Solids Epoxy is available in the following sizes

UK-HS Epoxy is supplied in 8L or 16L kits comprising:

8 Liter Kit  | Part A: 5.5L + Part B: 2L + One x 500ML Epoxy Pigment | Coverage up to 40sqm/coat
16 Liter Kit | Part A: 11L + Part B: 4L + Two x 500ML Epoxy Pigments | Coverage up to 80sqm/coat

Recommended Preparation Method Prior to Applying UltraKote High Solids Epoxy Resin

Preparation is the most important key to achieving a long-lasting floor-coating system

Diamond grinding is recommended method of preparing new & old substrates prior to applying Ultrakote HS Epoxy
The purpose behind concrete grinding is to remove any flaking paint and other types of contamination to achieve a clean surface as well as remove any sealer or curing agent and open concrete pores allowing 1st coat of UltraKote HS Epoxy to penetrate deep into the surface and seal the floor.

Acid Etching might be used as an alternative option to prepare the floor for more information on how to acid etch your floor click here to be directed to an external blog. Hydrochloric acid can be purchased from pool shops or local hardware stores

Consumption Coverage Guide| 15kg Ultrakote HS pigmented Epoxy Flooring kit

Area Size 1st coat 2nd Coat Recommended Minimum no of coats Required no of kits
Up to 40m2 8Lit 8Lit Two coats Two 8 liter kits
80m2 16 liters 16 liters Two coats Two 16 liter Kits


  • Use the table above as a guide only, as the consumption could depend on the application method/style and porosity of the surface.
  • Applying additional coats to the floors subject to heavy traffic is recommended
  • Thin down the first coat by adding 5% of general-purpose thinners
  • A slip-resistance surface covering can be achieved by adding anti-slip media


Guide to achieving R or P rated slip resistance floor covering using different grit anti-slip media

Slip Rating   P3 or R10 P4 or R11 P5 or R12
Recommended Product Boral 30/60 sand 

80 grit Aluminium Oxide

Boral 1mm sand 

46 or 30 grit Aluminum Oxide

Boral 1mm sand 

24 grit Aluminium Oxide


Document Download

Click on the tiles below to download ULTRAKOTE HS EPOXY’s Technical Data Sheets and Safety Data Sheets.

Safety Data Sheet Part A (SDS) Safety Data Sheet Part B SDS Technical Data Sheet TDS



Showing the single result