1800 037 699 Quote
0

Sikafloor 161 – 100% Solids Epoxy Resin Kit

Two-part low viscosity epoxy primer

$230.00 – $425.00 inc GST

Quantity:
SKU: 846465 Categories: ,

Description

Description

Sikafloor®-161 is an economic, two part, low viscosity epoxy resin. “Total solid epoxy composition according to the test method Deutsche Bauchemie e.V. (German Association for construction chemicals)”

NOTE: Sikafloor 161 is Sika’s Sikafloor 264 System without pigment.

  • Low viscosity
  • Good penetration
  • Excellent bond strength

Usage

  • For priming concrete substrates, cement screeds and epoxy mortars
  • For low to medium absorbent substrates
  • Primer for the Sikafloor®-MultiDur and Sikafloor®- MultiFlex flooring systems
  • Binder for levelling mortars and mortar screeds

Advantages

  • Low viscosity
  • Good penetration
  • Excellent bond strength
  • Can be accellerated using Sikafloor Booster
  • Can be used on substrates with an elevated moisture content <6%pbw
  • Multi-purpose

 

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Sikafloor 161 – 100% Solids Epoxy Resin Kit”

Your email address will not be published. Required fields are marked *

Packaging

Part A 6.55 kg containers
Part B   2.0   kg containers
Part A+B 8.55 kg ready to mix units

 

Part A 13.09 kg containers
Part B   4.0   kg containers
Part A+B 17.09 kg ready to mix units

Application Info

Mixing ratio

Part A : part B = 77 : 23 (by weight) – 2.1 : 1 (by volume)

 

Ambient air temperature

+10 °C min. / +30 °C max.

 

Relative air humidity

80 % r.h. max.

 

Dew point

Beware of condensation!
The substrate and uncured floor must be at least 3 °C above dew point to reduce the risk of condensation or blooming on the floor finish.

Note: Low temperatures and high humidity conditions increase the probability of blooming.

 

Substrate temperature

+10°C min. / +30°C max.

 

Substrate moisture content

Maximum 6 % moisture content using the Sika® – Tramex meter (at the time of application).
Please note that the moisture content must be < 6 % pbw when using the CM measurement or Oven-dry-method.

No rising moisture according to ASTM (Polyethylene-sheet).

 

Pot Life

Temperature Time
+10 °C ~ 50 minutes
+20 °C ~ 25 minutes
+30 °C ~ 15 minutes

 

Curing time

Before applying solvent free products on Sikafloor®-161 allow:

Substrate temperature Minimum Maximum
+10 °C 24 hours 4 days
+20 °C 12 hours 2 days
+30 °C 8 hours 24 hours

Before applying solvent containing products on Sikafloor®-161 allow:

Substrate temperature Minimum Maximum
+10 °C 36 hours 6 days
+20 °C 24 hours 4 days
+30 °C 16 hours 2 days

Times are approximate and will be affected by changing ambient conditions particularly temperature and relative humidity.

 

Consumption

Coating System Product Consumption
Priming 1–2 x Sikafloor®-161 1–2 × 0.35–0.55 kg/m²
Levelling mortar fine (surface roughness < 1 mm) 1 pbw Sikafloor®-161 + 0.5 pbw quartz sand (0.1–0.3 mm) 1.7 kg/m²/mm
Levelling mortar medium (surface roughness up to 2 mm) 1 pbw Sikafloor®-161 + 1 pbw quartz sand (0.1–0.3 mm) 1.9 kg/m²/mm)
Intermediate layer (self-smoothing 1.5 to 3 mm) 1 pbw Sikafloor®-161 + 1 pbw quartz sand (0.1–0.3 mm) 1.9 kg/m²/mm
+ optional broadcast quartz sand 0.4–0.7 mm ~ 4.0 kg/m²
Bonding bridge 1–2 × Sikafloor®-161 1–2 × 0.3–0.5 kg/m²
Epoxy screed (15–20 mm layer thickness ) / Repair Mortar 1 pbw Sikafloor®-161 + 8 pbw quartz sand 2.2 kg/m²/mm

Note: These figures are theoretical and do not allow for any additional material required due to surface porosity, surface profile, variations in level or wastage etc.

Data Sheets

PDS | SDS Part A | SDS Part B

Sika

Disclaimer

Colour accuracy disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.

Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.

Related products