NuFlex is a fine particle size, wet adhesion-promoted acrylic emulsion coating for cement and roof tiles and all masonry surfaces. Its technically advanced formula and 100% acrylic resin guarantee maximum durability and performance under adverse weather conditions. NuFlex is available in 29 standard colours and can be custom-tinted. NuFlex is a non-yellowing coating that will provide a waterproof, non-colour fading protective coating for at least ten years with correct application and preparation.

BENEFITS AND FEATURES OF NUFLEX ROOF COATING

• Guaranteed inter-coat adhesion
• Excellent gloss and colour retention
• Improved mould, fungus and lichen resistance
• 100% waterproofing guaranteed
• Flexible and durable
• Fast drying
• Easy application
• UV resistant
• High-build acrylic membrane coating for porous and rough tile surfaces
• 10 Year Manufacturer’s Warranty*

APPLICATION CONDITIONS

• Only apply between 10°C and 30°C ambient air temperatures
• Ensure no surface moisture is present prior to application
• Consider climatic conditions such as wind, humidity, overnight dew, and potential rain within 24 hours
• DO NOT apply NuFlex until the primer is completely dry
• Coating in very hot or cold conditions may reduce gloss appearance and affect durability.

Failure to observe these provisions may affect coating adhesion and performance

**Do Not apply NuFlex in very low or very High temperature**
Product Appearance & Coverage

Appearance: Opaque white or coloured viscous liquid

Coverage : 4m²/L (Per coat).

Minimum System dry film thickness: 200µm. To maximise performance, do not over spread

Coats Required: 2, Recoat Time: 2 Hours

Recommended Substrates: Suitably prepared and primed surfaces including concrete & terracotta roof tiles, sheet metal, asbestos, cement sheet, and asphalt shingles & sheets

Primer application: Refer to the TECHNICAL ADDENDUM in this TDS or contact us for the most suitable primer product for your project.

Nutech Roof Membrane Coating Care & Maintenance Fact Sheet
Download Datasheets.

Download Colour Chart

Colour accuracy disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.

Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.